Foundation Work

955_foundation_1

The foundation work has been underway this week and will be done by the end of the week. Block work started on Monday, insulation work was yesterday, and, weather permitting, they should be wrapping up the remainder of the work by the end of this work. Guess what this means?? Yep! The house will be delivered and set next week. We are quickly going to go from nothing to a two story structure in a matter of days. Ah…the beauty of prefab.

955_foundation_2

955_foundation_3

As you can see, we opted for a crawl space on this house. This was partially driven by economics and also by the prefab process. When working with prefab homes, you have to go with either a crawl space or a basement, as a slab-on-grade simply won’t work. This is because of the way prefab homes are manufactured. In order to build walls (both interior and exterior), you need a floor structure on which to build them in the factory. This necessitates building the floor structure in the factory. As a result, a slab-on-grade simply would not work.

We will wait to do any concrete pours (the garage, garage apron, front porch, sidewalk) until after the house gets set. By the end of next week, the site is going to look dramatically different. Keep your eyes open and look for the crane mid week next week!

 

 

Advertisements

Full Steam Ahead

In case you haven’t heard, full steam ahead with prefab and All-American Homes! We submitted the deposit at the beginning of last week and are eagerly awaiting their drawings for review. After we received these and talk with them, I’ll update you on where things stand.

All-American Homes Factory...Impressive!

All-American Homes Factory…Impressive!

Keep your eyes and ears peeled as progress continues forward…more and more posts will happen as we near the start of construction! Get excited!

Factory Meeting

House Elevations

Here are the promised exterior elevations/views of the house (for the most part). Check them out and let me know your thoughts.

The overall design of the house is very much driven by simplicity, taking a simple geometric form and manipulating it through a set of moves. As a result, the exterior design strategy reflects this same language and responds to this same strategy.

As mentioned in the previous post, the design of the house inherently becomes very linear in nature, due to the narrowness of the lot. As a result, the exterior material strategy responds to this condition, reacting to the linear nature while also reinforcing it in certain ways.

The material palette is limited, reflecting the minimal nature of the house. The materials currently being explored include: metal, fiber cement, wood, and perforated metal.

Northwest View

The primary exterior cladding is a vertical metal panel. The vertical nature of the panel responds to the linear condition of the house, not necessarily in opposition to it, but does serve to soften the length of the home and also provides a sense of verticality and scale to the house.

The secondary material is fiber cement lap siding and panel siding, a material very common in residential architecture. The horizontal nature of the lap siding serves as a strong contrast to the verticality of the metal, while still being subtle in nature, due to its dark color. The introduction of this material also serves as an opportunity to break down the exterior, providing moments of relieve from the primary cladding material and creating a sense of patterning on the facade. The panels give the sensation of the windows pushing down from above, up from below, or wrapping around the corner. This provides a sense of movement, activating the exterior.

The third material is wood. The introduction of wood at the recessed/carved out portions of the house serves to provide a sense of texture at the human scale. The wood is introduced at the recessed front entry and at the courtyard carved out between the garage and main house. These spaces are moments where the human scale is important, as they are moments of constant interaction and the wood provides that sense of warmth at these key moments where the user continuously interacts with the house.

The final material is a perforated metal. This metal serves as a sort of screen wall at the front entry. This entry is defined by the carving out of space, revealing the wood material, and the metal screen wall occupies the western edge of this entry porch. The perforations in the metal allow for a transparency through the space and a lightness to the space but still serve to define the front entry visually. Further, the perforations allow for the opportunity to use the material as a climbing surface, allowing vegetation to interact with the wall surface and also to soften this front entry.

North Elevation

East Elevation WestElevation

House Plan

I’ve been hard at work on the right plan for 955 Hosbrook. When you are dealing with any lot, you immediately look to the context and site constraints for influence. This lot is no different. The first thing you will notice is the size and scale of the plan. When dealing with a lot with a total width of 21′-6″, this absolutely becomes a driver for the design of the house.

Instead of approaching this width as a hindrance, the design for 955 embraces the concept of the narrow house, borrowing ideas from the shotgun house typology, a typology already in existence in Fountain Square. For those of you unfamiliar with the shotgun house, these are houses built primarily in the South following the Civil War and are characterized by their narrow width and minimal street frontage. They were designed for the working class, and are very small and modest in nature. Much of the reason for their narrow width is a result of taxation rules of the time, which were determined by amount of street frontage. Therefore, the narrower the house, the cheaper the taxes.

First Floor Plan

Second Floor Plan

The name “shotgun house” is often thought to be derived from the notion that one could open all of the interior doors in the house and a shotgun could be fired from the front door through these doors and straight out the back door of the house. This concept is the initial driver for the design of 955, the concept of continuity from front to back. As a result, the dominate design feature in the house is focused around the creation of a continuous line of casework along the western interior wall of the house, on both the first and second floors. The continuity of this feature reinforces the idea of continuity from the front door through the house to the back door, creating a pathway cutting through the house, a visual continuity along this line.

Further, this casework acts as a sort of buffer between the house and the close proximity of the freeway to the west. The casework acts as an almost thickened wall, in a sense creating a sort of buffer zone, while still being punctured in moments to allow for daylight and views of the downtown skyline. This line of casework contains much of the functional components of the house. Key functions include:

First Floor:

Coat Closet: Adjacent to the front entry is a full height coat closet, addressing the entry sequence and need for storage.

Kitchen: Just beyond the coat closet and entry is the kitchen. In a small house where space is at a premium, it makes most sense in this scheme to combine the circulation pathways needed within a kitchen space with the circulation pathway needed to move through the house. The kitchen component contains all of the necessary cooking components, including a full height pantry cabinet. The refrigerator is located on the opposite wall under the stair to allow for this casework component to be streamlined, with minimal interruptions to its continuity.

TV/Entertainment: As you move toward the living space, the casework transitions into the casework serving the adjacent living space. This casework serves as the location for the entertainment components of the living space, including television, music, and associated storage.

Work Space: Beyond the living space at the emergence of the outdoor courtyard, the casework transitions into a work space, containing desktop space providing adequate work space for computers and associated necessary storage.

Mud: At the point where the casework terminates into the garage, drop off “mud” space exists to allow for coat and shoe storage as one enters from the garage.

Second Floor:

Wardrobe Closet: The main bedroom on the second level contains a continuous run of wardrobe closet, providing adequate storage space for clothing, while still allowing for additional storage space or the option to incorporate a space for a television.

Laundry: A stackable washer/dryer element exists directly at the top of the stairs, providing direct access from the upstairs bedroom.

Books and Window Seat(s): In the corridor connection to the roof deck, the caswork becomes a sort of library space, with space for book storage and additional shelving space while also providing related window seats to sit up, read a book, and enjoy great views of downtown.

As this continuous line of casework is the conceptual framework for the house, the remainder of spaces connect from this circulation pathway, keeping interior spatial organizations simple and connected. You will notice the house occupies the majority of the site, from front to back and outdoor space is at a premium. As a result, the desire to still connect to the outdoors is one of much importance. The main living space directly flanks the outdoor courtyard, providing for an intimate green space and lots of natural light into the space. Additionally, the use of the single story garage allows to make up for the minimal ground floor outdoor space, providing a large second floor roof deck.

So, what do you guys think? As I’ve often stressed, the scale of house here is very important to me. This house is small, but serves the concept of living quite well. Let me know your thoughts. Elevations (exterior and interior) to come very soon…

New Lot Location

As you may or may not remember, I had previously mentioned I was in the process of purchasing a vacant lot on Lexington Street in Fountain Square. After unforeseen circumstances involving existing unpaid demo fees on that lot, the brokerage firm was unable to sell the lot. As a result of this, I was forced to move on and continue the search for a suitable lot for my own house in Fountain Square.

This search for a vacant piece of property in Fountain Square has not necessarily been an easy one. Vacant lots on the open market are few and far between, so I’ve found it takes a little more digging and determination to find a piece of property. Alas, I have discovered my lot (a fantastic one…I might add), and the quest to build my own home continues.

The new lot location is on the west end of Hosbrook (955 Hosbrook) and is quite unique to Indianapolis (not 100% unique to Fountain Square though). Why is it unique? Simply put, it’s 1600 square feet. Yes, 1600 square feet for the entire lot (it seems many of the homes built today have a footprint of 1600 square feet, let alone the entire lot being this size).

955 Hosbrook

955 Hosbrook - Close

Now, you may be wondering why I would be so interested and committed to building on such a small piece of property, but really, there are plenty of reasons to justify the lot.

The location is great.

The property shares an alley with the north side of Virginia Ave, meaning I am adjacent to the main commercial drag in the neighborhood. This means quick access to restaurants, bars, art galleries, the cultural trail, etc. I think you get it. All of the reasons Fountain Square is so great. It’s a completely walkable neighborhood, and this lot takes full advantage of this fact.

The view is great.

Because of the wonderful introduction of the interstate system through downtown Indianapolis (this is obviously sarcasm here), This property ends up with an uninterrupted view of downtown Indy (not dissimilar from the Shelby Street house). Further, you get nice views up Virginia Ave into Fletcher Place and Holy Rosary as well.

(Google Street View will have to do for the moment)

(Google Street View will have to do for the moment)

The neighborhood is great.

Fountain Square is definitely on the upswing, the residential areas are no different. This lot on Hosbrook actually sits within the small hood known as North Square. It’s a really great location as North Square has a small but active neighborhood association and has a great mix of people in the neighborhood. Also, it’s great to see the mix of architectural styles in the neighborhood and openness to new and contemporary ideas about home design.

The lot essentially forces the belief in house size and scale.

To me, this is by far the number one reason I love this lot. It’s a 20 foot wide lot (give or take a couple feet…waiting on the official survey), something not often seen in the flat and sprawling city of Indianapolis. Fountain Square, however, has a much higher concentration of these 20′ lots than most other parts of the city. Much of Fountain Square developed as a more working class neighborhood, resulting in much more modest homes, and often modest meant smaller in scale. As a result, the shotgun house typology was one often turned to for new homes in the neighborhood, and these were most often built on 20′ lots.

Further, not only is the lot narrow, it’s shallow (less than 80′ deep). Because of the way the street grid works, with Virginia being one of the four spokes out from Monument Circle, you end up this narrowing condition as one moves west along Hosbrook Street, each lot becoming shallower and shallower. This lot being at the west end of the street, is one of the shallowest lots on the street, and probably within the entire neighborhood.

I actually love these constraints. I often find the constraints open up new ways of thinking about design. They force us into a set of parameters, and these parameters are foreign to our typical day to day design processes. As a result, the design will necessarily be specific to its location and given condition, and will take advantage of these constraints (these constraints become opportunities to re-imagine the house and re-envision it).

It is my hope that with this house we can continue the discussion on how we live and how size factors into this. We have become so much a society built on material goods, constantly bombarded with advertising, products, electronics, etc. While I am not much different from the average person and often fascinated by many of these products, I want this house to be a testament to a smaller, more simple way of living, stripping the house of much of its unnecessary square footage and better understanding how to efficiently use space.

As you probably already guessed, I have been hard at work scheming away, and am definitely liking the direction the design is going. There are a number of factors at play with the design, beyond its site, including cost, materiality, form, scale, size, etc. As I continue to work through these schematics I will most definitely share these with you. Look for some plans in a few days (as I am almost set on their direction).

2013…

photo(6)d

Well…it’s the start of a new year.  Thanks to everyone who has followed this blog throughout 2012 and been a part of the crazy ride that is 701 Shelby.  It has definitely seen it’s share of ups and downs but it has most definitely all been worth it.

I apologize for the lack of posts for some time now…this will be remedied in 2013.  Here are a few quick updates on 701 Shelby:

  • Most work at 701 has been completed.  At this point, it is primarily furnishing and minor interior work to be done.  This has included the installation of the wardrobe closet, bathroom storage, sliding barn doors, window coverings, furniture, etc…A recap of the the house in general is due and will presented in the near future.
  • My brother, Patrick, has now moved into the house and has been living there for about a month.
  • In regards to interior furnishings…I will be featuring a few posts detailing a few of the furniture pieces in the house, as a couple of the pieces were done by myself and also the work of a few friends.
  • Interior Pictures will be posted as they become available…this has been somewhat delayed simply by the moving-in process and waiting for things to get to a more finished state.
  • Landscape work will not begin until spring breaks, but there will be much discussion on this as well…as it is a very important aspect of the home.  There has always been a strong intent to merge interior and exterior, nature and house.

As a result of the house being occupied, this blog will also slowly begin to evolve into more than just a blog about 701 Shelby.  It will delve into other design related topics, including the discussion and featuring of all things design related, with a focus on the local Indianapolis and Midwest community.

If you have suggestions on what you would like to see this blog bring in 2013, feel free to leave some comments.  This is a great opportunity to help shape the future of urbanhomeINDY and it’s direction and would be very valuable.  As the blog is titled, urbanhomeINDY, it seems fairly obvious that the blog should have a focus on things urban related, things home related, and things Indy related. This is what you will begin to see more of. Here are a few potentials for what might appear on urbanhomeINDY in 2013:

  • Design discussion/reviews of new architectural works in Indianapolis and the Midwest.
  • Discussion on residential design, inspiration, key projects worth seeing, etc.
  • Periodic featuring of local designers and their work
  • Discussion/calendar of design related events
  • Periodic analysis/discussion on existing urban conditions in Indianapolis and the Midwest and opportunities for unique interventions from both the architecture and design communities

Any thoughts or wishes???